Exit buttons may be used with Compact, Switch2 or Net2 systems. The E series is designed to match our range of PROXIMITY readers and keypads. They are supplied with a choice of black or white fascias which can be fitted in the final stages of installation. Replacement bezels are available to Paxton Access registered installers free of charge. The E series exit buttons are available in three sizes. They are suitable for interior use.

The Marine exit button is designed for looks as well as function. It uses a touch sensitive lens. The Marine exit button is suitable for interior use.

Installation - The installation instructions show how the exit button is wired to Compact, Switch2 and Net2 systems. The E75 exit button fits on a standard UK recessed backbox.

The exit button with screw connectors is not pre-wired. It is supplied with rising clamp terminals at the rear.

Operation - E Series. The green LED is lit continuously. When the exit button is pressed, the green LED flashes to indicate that the door is unlocked (only when used with Switch2 and Net2).
Marine exit button. Just touch the lens, the door opens and the exit button which is normally backlit green, flashes (only when used with Switch2 and Net2).

• Robust exit buttons
• 3 sizes available in E series
• E series complements P series PROXIMITY readers and K series keypads
• Stylish Marine exit button
• Marine exit button uses a touch sensor

Specification

Paxton Access Exit Button E75 With Screw Connector - 165318574

Specifications - Exit button E75 with screw connector
	min	typ	max	units
Electrical
Operating voltage	11	12	14	V d.c.
Current consumption	45		70	mA
System Specification
Environment
Operating temperature	-20		55	°C
Vandal resistance		Low
Dimensions
Cable length		None included
Width		86		mm
Height		94		mm
Depth		16		mm