Description
K series keypads are for use with Switch2 and Net2 systems. The keypads are supplied with a choice of black or white bezels. Additional colours are available to Paxton Access registered installers free of charge.
Installation - The keypad is wired as shown on the control unit label. The cable exits centrally from the back of the keypad making drilling and mounting very accurate.
Operation - A code is entered using the keypad. The control unit checks the validity of the code and grants or denies access as appropriate.
- Use with Switch2 or Net2
- Backlit Keypad
- Supplied with a choice of black or white bezels
- 3 sizes
- Low profile-less than 16mm deep
- Easy mounting
- IPX7 rated - suitable for external use
Specification
Paxton Access 371-120 Touchlock K75 Keypad + Screw Connector - 165318733
| Specifications - TOUCHLOCK K75 keypad with screw connector |
| | min | typ | max | units |
| Operating voltage | 8 | 12 | 14 | V d.c. |
| Current consumption | 50 | | 120 | mA |
| Clock & data bit period | | 600 | | µs |
| Cable type for extensions | | Beldon 9540 | | |
| Maximum cable extension length | | | 100 | m |
| Backlit | | Yes | | |
| Additional coloured bezels available | | Yes | | |
| Operating temperature | -35 | | 66 | °C |
| Moisture resistance | | IPX7 | | |
| Vandal resistance | | Medium | | |
| Cable length | | None included | | |
| Width | | 38 | | mm |
| Height | | 78 | | mm |
| Depth | | 12.5 | | mm |
Rate and Review centre coming soon.
