The term 'Hands free access control' means the token that identifies a user is read from within a pocket or handbag. No hands required. This is useful for gates and barriers, loading doors and where disabled or elderly people require access. The hands free keyfobs, in conjunction with hands free interface, achieve this using the unique wireless technology.

The Net2 keycard is a hands free token with additional functions. Pressing a button on the card momentarily boosts the range of the keycard, typically to 5m (maximum 50m).

Installation - Hands free tokens will work as a standard token with all PROXIMITY readers. P series readers and KP series keypads equipped with a hands free interface will achieve longer 'hands-free' ranges.

Operation - Hands free tokens work in active and passive modes. They give a range of between 0.85m and 2.5m on any reader equipped with a hands free interface. They work in passive mode with all other Paxton Access proximity readers. The tokens are enrolled onto the Net2 system using the standard desktop reader.

• Hands free keyfob from 0.85m to 2.5m read range
• Hands free keycard increases the range to typically 5m (maximum 50m)
• Up to 5m read range with the Long range reader
• Active tokens with replaceable batteries
• Batteries last an average of 5 years
• Works as a standard passive token with non-hands free readers
• Use with P and KP readers (with the hands free interface) and the Long range reader
• Uses wireless technology

Specification

Paxton Access 690-333 Net2Air Handsfree Keycard - 926000829

Specifications - Net2 hands free keycard
	min	typ	max	units
Electrical
Carrier frequency		2.4		GHz
Carrier frequency		125		kHz
Battery life		5		years
Battery type		1 x CR2430
Environment
Operating temperature	0		50	°C
Dimensions
Width		55		mm
Height		85		mm
Depth		10		mm